喷砂和喷丸的区别

喷砂和喷丸的区别

    喷丸是以金属弹丸,利用压缩空气或机械离心力为动力和摩擦力来除去金属锈蚀的方法。弹丸直径在0.2-2.5mm之间,压缩空气压力为0.2-0.6Mpa,喷流与表面角度为30度-90度左右。喷嘴系用T7或T8工具钢制成并淬火至硬度50-55HRC,每个喷嘴使用期限为15-20天。

 

    喷丸是用来清除厚度不小于2mm的或不要求保持准确尺寸及轮廓的中型、大型金属制品以及铸锻件上的氧化皮、铁锈、型砂及旧漆膜。是表面涂(镀)覆前的一种清理方法。广泛用于大型造船厂、重型机械厂、汽车厂等。用喷丸进行表面处理,打击力大,清理效果明显。但喷丸对薄板工件的处理,容易使工件变形,且钢丸打击到工件表面(无论抛丸或喷丸)使金属基材产生变形,由于Fe3O4和Fe2O3没有塑性,破碎后剥离,而油膜与基材一同变形,所以对带有油污的工件,抛丸、喷丸无法 彻底清除油污。

 

    喷砂也是一种机械清理方法,但并喷砂不是喷丸,喷砂用的是砂粒如石英砂,喷丸用的是金属弹丸。在现有的工件表面处理方法中,清理效果最佳的还数喷砂清理。喷砂适用于工件表面要求较高的清理。

Write a comment

Comments: 0
Mooncake's Day
Mid-Autumn Festival

Dynamic News

Contact Us

Langfang Olan Glass Beads Co.,Ltd

Tel:   +86-316-2013621

Fax:  +86-316-7018536

Mob: +86-151-0066-3145

QQ(Wechat):  348575348

Email: sales@cnglassbead.com 

Website:  www.cnglassbead.com  

Contact us by Olan Wechat
Contact us by Olan Wechat
Olan is the member of CCOIC
Olan is the member of CCOIC
Olan is the member of CCPIT
Olan is the member of CCPIT
Olan is the member of MOFCOM
Olan is the member of MOFCOM
Olan is the member of GACC
Olan is the member of GACC
Olan is the member of AQSIQ
Olan is the member of AQSIQ
Olan is the member of SAIC
Olan is the member of SAIC
Olan is the member of BOC
Olan is the member of BOC
View David Wang's profile on LinkedIn